Tour Of The Remote Control; Connections; Choosing A Connection - Samsung DVD-P490 User Manual

Tour of the Remote Control

1. DVD POWER Button
DVD-P490/490K
Turns the power on or off.
DVD-P390/390K
2. REPEAT Button
DVD-P290/290K/P295
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
Brings up the Disc menu.
12
1
4. BOOKMARK
2 13
Quickly find bookmark sections
14
3
15
4 of a DVD.
5
5. SEARCH Buttons (
16
6
Allow you to search forward/back
7
ward through a disc.
17
8
18
6. STOP Button (
9
7. SKIP Buttons (
10
19 Use to skip the title, chapter or track
20
8. MENU Button
11 21
Brings up the DVD player's menu.
9. ENTER /π/†,√/® Buttons
This button functions as a toggle
switch.
10. AUDIO Button (√)
Use this button to access various
audio functions on a disc.
1. DVD POWER Button
DVD-P191/191K
Turns the power on or off.
DVD-P190/P192
2. REPEAT Button
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
Brings up the Disc menu.
1 11
2
12 4. BOOKMARK
13
3
Quickly find bookmark sections of a
14
4
DVD.
15
5 16
5. STOP Button (
6
6. SKIP Buttons (
17
Use to skip the title, chapter or track
7
18
7. MENU Button
8
Brings up the DVD player's menu.
9
19
8. ENTER/π/†,√/® Buttons
10
20
This button functions as a toggle
21
switch.
9. AUDIO Button (√)
Use this button to access various
audio functions on a disc.
10. INFO Button
Displays the current disc mode.
4
11. INFO Button
Displays the current disc mode.
12. OPEN/CLOSE ( ) Button
To open and close the disc tray.
13. REPEAT A-B Button
Allows you to repeat A-B disc.
14. USB Button
15. VIDEO SEL. Button
Selects video output formats.
16. PLAY/PAUSE Button (
/ ) Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
) Returns to a previous menu.
/ ) 19. TITLE MENU Button (®)
Brings up the Title menu.
20. KARAOKE Button († )
(Only DVD-P490K/390K/290K/
P295K)
Use to begin Karaoke functions.
21. CANCEL Button
Use to remove menus or status
displays from the screen.
11. OPEN/CLOSE ( ) Button
To open and close the disc tray.
12. REPEAT A-B Button
Allows you to repeat A-B disc.
13. ZOOM Button
Enlarges the DVD Picture.
14. VIDEO SEL. Button
Selects video output formats.
15. SEARCH Buttons (
Allow you to search forward/back
) ward through a disc.
/ ) 16. PLAY/PAUSE Button (
Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
Returns to a previous menu.
19. TITLE MENU Button (®)
Brings up the Title menu.
20. CANCEL Button
Use to remove menus or status
displays from the screen.
21. KARAOKE Button (†)
(Only DVD-P191K)
Use to begin Karaoke functions.

connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user's manual of the additional components you are connecting for more information on those
particular components.
)
A. Connecting to a TV (VIDEO CVBS)
- Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear
of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
- Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Video signal from the DVD player appears on the
TV screen.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page.
- The number and position of terminals can vary depending on your TV set.
Please refer to the user's manual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
DVD player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN ) (Except DVD-P190).
B. Connection to an Audio System (2 Channel Amplifier, Dolby
Digital,MPEG2 or DTS Amplifier)
- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to
the AUDIO (red and white) IN terminals of the Amplifier.
- If Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player to the VIDEO
terminal of your TV, If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the
rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
/ )
- Turn on the DVD player, TV, and Amplifier.
- Press the input select button of the Amplifier to select external input in order to hear sound from the DVD
player.
)
Refer to your Amplifier's user manual to set the Amplifier's audio input.
C. Connections to a TV Interlace / Progressive (Except DVD-P190)
- Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD
player to the COMPONENT IN terminal of TV.
- If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to
the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Component signal from the DVD player appears
on the TV screen.
- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO SEL. button to
change the Video Output mode.