Voice Commands - Nokia N71 User Manual

R1114_en.book Page 97 Friday, September 16, 2005 9:36 AM
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
In the standby mode, indicates a headset is
connected, and that the headset is unavailable, or a
Bluetooth connection to a headset is lost.
loopset is connected and
Select Headset, Loopset, TTY, Bluetooth
Music stand and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See 'Profiles—set tones', p. 85.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to Beep once
answer is disabled. Automatic answer is not available for
TTY.
97
Lights (for music stand only)—Set whether lights remain
on, or are switched off after the time-out.
If you are using a TTY, you must activate it on your device.
Press , and select
TTY > Use TTY
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see 'Voice dialing', p. 52.
To activate enhanced voice commands for starting
applications and profiles, you must open the
indicates a
application and its
that a TTY is connected.
Tools > Voice com.
handsfree, or
tags for the applications and profiles. To use enhanced
voice commands, press and hold
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select
application. To add a second voice command that can be
used to start the application, select
or Silent, automatic
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
Tools > Settings > Enhancement
> Yes.

Voice commands

Voice com.
Profiles folder. Press , and select
> Profiles; the device creates voice
in the standby mode,
Options >
Options > Change
>
New