Nokia N71 User Manual page 20

R1114_en.book Page 20 Friday, September 16, 2005 9:36 AM
The camera has an LED flashlight for low light conditions.
The following flashlight modes are available: Automatic,
On, and Off.
To use the flash, press or
select On.
If the flash is set to Off or Automatic
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
Setup settings—Adjust colour and
lighting
To enable the camera to reproduce colours and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Open setup
following:
Video scenes/Image scenes—Select a scene which is
appropriate for the environment in which you are taking
pictures. See 'Scenes', p. 12.
Flash (images only)—Set the flash according to the
lighting conditions. See 'The flash', p. 11.
White balance—Select the appropriate setting which
matches the lighting conditions. This allows the camera to
reproduce colours more accurately.
20
Colour tone—Select the colour effect you want.
The display changes to match any settings made.
The settings return to the default settings when you close
to highlight Flash and
the camera. If you select a new scene, the settings are
replaced by the settings of the selected scene. See 'Scenes',
during bright p. 12. If you need to change the setup settings, however,
you can change them after selecting a scene.
The settings available will vary depending on whether you
have the front or main camera selected.
Scenes
A scene helps you to obtain the correct colour and lighting
settings for the current environment. Select the
appropriate scene for taking pictures or recording video
clips from the scenes list. The settings of each scene have
been set to match a certain style or environment. Select
and select from the
Options > Open setup
Video scenes
Normal (default)—Use this scene in any conditions.
Night—Use this scene in low light conditions. The night
mode is indicated with
Image scenes
Automatic (default)—Use this scene in any conditions.
> Video scenes/Image scenes:
.