Messaging - Nokia N71 User Manual

R1114_en.book Page 78 Friday, September 16, 2005 9:36 AM
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options
Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item and Options > Send
Devices with Bluetooth technology within range start
to appear on the display.
Device icons: computer, phone,
video device, and other device.
To interrupt the search, select Stop.
3
Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See 'Pair devices', p. 11.
5
When the connection has been established,
data is shown.
The Sent folder in

Messaging

sent using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
> Send > Via To open the paired devices view (
application main view, press
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
> Via Bluetooth. a factory-set passcode. The passcode is used only once.
To pair with a device, select
device. Devices with wireless Bluetooth technology within
audio or
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
on the other device as well. After pairing, the device is
saved to the paired devices view.
Sending
does not store messages
), in the Bluetooth
.
Options > New paired
78