Nokia N71 User Manual page 9

R1114_en.book Page 9 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
Settings
Your Nokia NXX normally has MMS, GPRS, streaming, and
Internet settings automatically configured in the device,
based upon your service provider or network operator
information. You may have settings from your service
providers already installed in your device, or you may
receive the settings from the service providers as a special
text message.
Transfer content from
another device
You can copy content such as contacts and calendar
entries from a compatible Nokia phone to your Nokia NXX
using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the phone model.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When
Nokia N80 is switched on without a SIM card, the offline
profile is automatically activated.
To avoid duplicate entries, you can transfer the same type
of information (for example, contacts) from the other
device to your Nokia XXX only once.
Transfer content
1 Press , and select Tools > Transfer
your Nokia XXX.
2
In the information view, select Continue.
3 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
4 If you select Bluetooth connectivity:
To have Nokia XX search for devices with Bluetooth
connectivity, select Continue. Select your other device
from the list. You are asked to enter a code on your
Nokia XXX. Enter a code (1-16 digits), and select OK.
Enter the same code on the other device, and select
OK. The devices are now paired. See 'Pair devices',
p. 78.
For some phone models, the Transfer
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
If you select infrared, connect the two devices. See
'Infrared connection', p. 79.
> Copy data on
application is
9