2
Assembly
PREPARING SITE
To find the ideal location to set up this cross trainer, ensure that:
• Area is well illuminated and well ventilated.
• Surface is level.
• There is enough space to access the unit and emergency dismount. If it is possible,
keep the following clearances: 0.5 m at each side and 2 m at the back.
• The cross trainer is placed in an environment with a relative humidity range of 30-
50%. Please ensure the temperature is kept constant. Do not use in a moist or damp
environment as this may impact on the integrity and performance of the machine.
DIAGRAM
Foot Plate
Bottom Frame
Rear Stabiliser
Pulse Plates
Bottle Holder
Right Swing Arm
Pedal Bar
Wheel Cover
Foam Grip
Monitor
Main Base
Front Stabiliser
9