Advertisement
!
CAUTION
♦
Per GR‐1089‐CORE the ADTRAN system that the SFP is being
deployed in is designed and intended for installation as part of
a Common Bonding Network (CBN). The ADTRAN system
that the SFP is being deployed in is not designed nor intended
for installation as part of an Isolated Bonding Network (IBN).
♦
Per GR‐1089‐CORE Section 9, the Bidirectional SFP does not
have an internal DC connection between battery return and
frame ground. The Bidirectional SFP can be installed in a DC‐I
(isolated) or DC‐C (common) installation. For installations
where other cards or the host system have internal connections
between battery return and frame ground, the system would
be intended for deployment only in a DC‐C installation.
♦
The ADTRAN system chassis frame ground terminal must be
connected to a reliable earth ground to ensure that the metal
enclosure of the Bidirectional SFP is properly grounded via the
backplane connector.
C
CAUTION
The Small Form‐Factor Pluggable OC‐12 Bidirectional 1310/1550
nm is a Class 1 Laser Product and complies with the Laser Safety
requirements of FDA 21 CFR 1040.11, EN60825‐1, and EN60825‐2.
The Bidirectional SFP is NRTL Listed and CB Certified to all
applicable American and European safety standards.
NOTE
The Gigabit Ethernet port(s) are optical and therefore are not
classified as any type of port as defined in Appendix B of GR‐
1089‐CORE Issue 5.
The Bidirectional SFP is designed to meet the following environ‐
mental classes:
♦
ETSI EN 300 019‐1‐1 "Classification of environmental
conditions; Storage," Class 1.2
♦
ETSI EN 300 019‐1‐2 "Classification of environmental
conditions; Transportation," Class 2.3
♦
ETSI EN 300 019‐1‐3 "Classification of environmental
conditions; Stationary use at weather‐protected locations,"
Class 3.3
The equipment is designed to function without degradation
during exposure to all test severities per Class 3.3.
The Small Form‐Factor Pluggable OC‐12 Bidirectional 1310/1550
nm meets EU RoHS Directive 2002/95/EC and/or applicable
exemptions. Refer to www.adtran.com for further information on
RoHS/WEEE.
Warranty:
ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can
be found online at www.adtran.com/warranty.
©2010 ADTRAN, Inc. All Rights Reserved.
NOTE
♦
This Bidirectional SFP is compliant with SFF‐8472 "Digital
Diagnostics Monitoring Interface for Optical Transceivers,"
Revision 9.3.
♦
This Bidirectional SFP is compliant with the Small Form‐Factor
Pluggable (SFP) Multi‐Source Agreement (MSA).
♦
This Bidirectional SFP is designed to be deployed in GR‐3108‐
CORE environmental class 1 or 2 as defined in GR‐3108‐CORE
Issue 2.
C A U T I O N !
C A U T I O N
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
ADTRAN CUSTOMER CARE:
From within the U.S.
1.800.726.8663
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
*61442704PG1-22A*
Advertisement
