Emerson Rosemount 644 Reference Manual page 40

Section 2: Configuration
April 2015
Configuring alarm and saturation levels with a Field
Communicator
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Configuring alarm and saturation levels with AMS Device
Manager
1.
2.
3.
4.
5.
Configuring alarm and saturation levels with LOI
Reference the figure below to find the alarm and saturation value configuration path on the LOI.
Figure 2-15. Configuring Alarm and Saturation Values with LOI
VIEW CONFIG
SENSOR CONFIG
UNITS
RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU EXTENDED MENU
EXIT MENU
* Available only if option code (S) or (D) is ordered.
** Available only if option codes (S) and (DC) are both ordered, or if option codes (D) and (DC) are both ordered.
30
Right click on the device and select Configure.
In the left navigation pane select Manual Setup.
On the Analog Output Tab find the Alarm and Saturation Levels group box.
Enter the High Alarm, High Saturation, Low Saturation and Low Alarm levels to the
desired vales.
Select Apply when complete.
2, 2, 5, 6
CALIBRAT
DAMPING
VARIABLE MAP
TAG
ALM SAT VALUES ALM SAT VALUES
PASSWORD
SIMULATE
HART REV
HOT BACK CONFIG**
DRIFT ALERT**
....
Reference Manual
00809-0200-4728, Rev RA
ROSEMNT VALUES
NAMUR VALUES
OTHER VALUES
BACK TO MENU
EXIT MENU
Configuration