Emerson Rosemount 644 Reference Manual page 21

Reference Manual
00809-0200-4728, Rev RA
Figure 2-2. Field Communicator Device Dashboard Interface
Field Communicator menu trees and Fast Keys are available in
Menu Trees and Fast Keys
With an AMS Device Manager software package, you can commission and configure
instruments, monitor status and alerts, troubleshoot from the control room, perform advanced
diagnostics, manage calibration, and automatically document activities with a single
application.
Full configuration capability with AMS Device Manager requires loading the most current Device
Descriptor (DD) for this device. Download the latest DD at www.emersonprocess.com, or
www.hartcomm.org.
Note
All steps listed in this product manual using AMS Device Manager assume the use Version 11.5.
Configuring with an LOI
The LOI requires option code M4 to be ordered. To activate the LOI push either configuration
button. Configuration buttons are located on the LCD Display (must remove housing cover to
access the interface. See
configuration button location. When using the LOI for configuration, several features require
multiple screens for a successful configuration. Data entered will be saved on a screen-by-screen
basis; the LOI will indicate this by flashing "SAVED" on the LCD Display each time.
Note
Entering into the LOI menu effectively disables the ability to write to the device by any other
host or configuration tool. Make sure this is communicated to necessary personnel before using
the LOI for device configuration.
Configuration
Configuring with AMS Device Manager
Table 2-2 for configuration button functionality and
Section 2: Configuration
Appendix C: Field Communicator
Figure 2-3
April 2015
for
11