Disconnecting The Airmini Tubing; Removing The Humidx Or Humidx Plus; Unplugging The Machine - ResMed AirMini Clinical Manual

Disconnecting the AirMini tubing

For F20 only
Disconnect the F20 connector from the AirMini
tubing by gently twisting it and pulling it apart.
For N20 and AirFit P10 for AirMini only
Disconnect the vent module from the AirMini
tubing by gently twisting and pulling it apart.

Removing the HumidX or HumidX Plus

For N20 and AirFit P10 for AirMini only:
1. Disconnect the mask tube from the vent
module by gently twisting and pulling the two
apart.
2. If a HumidX or HumidX Plus is being used,
remove it from the vent module.
Note: The HumidX and HumidX Plus cannot be
washed.

Disconnecting the AirMini tubing

Disconnect the AirMini tubing from the machine by pressing the side buttons on the cuff and pulling
it away.

Unplugging the machine

Unplug the power supply unit from the power outlet and the machine.
Note: For mask disassembly instructions, refer to the mask user guide.
18