Setting Up The Airmini System; Setting Up The Machine; Adding Optional Humidification; Connecting Your Mask - ResMed AirMini Clinical Manual

Setting up the AirMini system

Before setting up the machine, ensure that the selected mask is compatible and that it is correctly
positioned on the patient's face. The machine is compatible with ResMed's F20 and N20 series
masks and with the P10 for AirMini. Refer to the mask device compatibility list on
www.resmed.com for more information. Refer to the mask user guide for fitting information.
See Using clinical mode for information on preparing to use the AirMini app with a smart device.

Setting up the machine

1. Plug the power supply unit to the
machine and the power outlet.
The connector has an angled edge so that
the power cord can only be inserted into
the machine one way.
2. Connect the grey end of the air tubing
firmly to the air outlet.

Adding optional humidification

For N20 or AirFit P10 for AirMini only:
To insert the HumidX or HumidX Plus:
1. Open the connector by gently twisting it.
2. Hold the HumidX/HumidX Plus with the
colored side pointing down and insert it.
3. Gently push together the connector and twist
until it locks in place.

Connecting your mask

Attach the connector to the mask.
F20 Series
10
N20 Series AirFit P10 for AirMini