Push Messages; Go To Url; Profiles - Pantech PG-3810 User Manual

Note: This feature will not be available if the manufacturer provides a default
bookmark.
Go: Goes to the related site.

1.6 Push Messages

The phone can receive Push Messages from the Service Provider.
1.6.1 Inbox
The Push message is stored in Inbox. Select and check a message from the
message list of Inbox to contact the WAP page concerned.
Press the [Option] Soft key [ ] to;
Delete: Deletes a message.
Delete All: Deletes all the messages in Inbox.
Go to: Goes to related site.
1.6.2 Receive
Sets up Push Message receiving.
Accept All: Receives all Push messages.
-
Accept None: Rejects all messages.
-

1.7 Go to URL

You can directly input and connect to the desired URL.

1.8 Profiles

(Note: The parameter settings have been already entered as required by the
service provider. Care should be taken when you make any modification to a profile
since it may cause malfunction of WAP.)
Selects or edits the Connection Profile supplied by the phone.
Select the Profile List and press the [OK] key for setup.
The Unedited Profile will not be selected.
Select the Profile List and press the [Edit] Soft key to edit a profile.
Profile Name: Pressing the [OK] key allows you to enter the edit mode
-
to change a profile name.
Home URL: Pressing the [OK] key allows you to enter the edit mode to
-
edit the Homepage URL provided by the service provider.
Connection Type: Select either WAP or HTTP.
-
GSM Settings: This menu allows you to set the GSM network proxy,
-
and has the following sub-menus:
- Gateway or Proxy: Pressing the [OK] key allows you to access the
submenus such as IP Address, IP Port, Login ID and Password. For
each submenu, pressing the [OK] key lets you enter edit mode to edit
every item provided by the service provider.
- Data Call Type: Use the left or right navigation key to select from the two
modes: ISDN and Analogue.
- Dial Number: Pressing the [OK] key allows you to enter the edit mode to
65