Table of Contents
Advertisement
7.2 Changing Text Input Mode
When you are in the area where you can input the text, the text input mode
indicator will be displayed at the bottom of the display.
Example: Entering a memo.
The number of remaining characters you can enter.
Editing area
The current text input mode and language.
To switch to other text input modes:
Press the Soft key [Right] indicating the current text input mode.
①
Toggle to the mode you want to use by pressing the Soft key [Right]. The
②
'Lang.' option allows you to change the text input language.
Inserting a Space
To insert a space between words, press the [0] key. If in 123 mode or Symbol
mode, press and hold the [0] key to input space.
Scrolling
To move the cursor to the left or right within the text, press the navigation
[Left/Right] key. And also, to move the cursor to the up or down among the lines,
press the navigation [Up/Down] key.
Note: By pressing the [Side Up/Down] key, the cursor can be moved very quickly
to the beginning or the end of the text.
Clearing Letters and Words
To clear the letter to the left of the cursor, press the [C] key.
You can clear all of the letters on the editor box, press and hold the [C] key.
Returning to the Previous Screen
When the text input field is empty, press the [C] key to return to the previous
screen.
TIP: To change the text input mode quickly
Press and hold [*]
Shows symbol mode.
Returns to the previous screen in Symbol mode.
Press [0]
Enters a space Character.
Press [C]
Deletes characters one by one.
Returns
to
characters.
Press and hold [C]
Deletes all characters and moves the cursor to the
beginning of the input screen.
7.3 Using T9 Mode
previous
screen
after
deleting
all
31
Advertisement
Table of Contents
