Ending A Call; Using The Headset - Pantech PG-3810 User Manual

Press the [Up/Down] key to highlight a participant and press the [OK] key.
②
Now you can talk
The other participants can continue the conversation with each other.
To return to the multi-party call, press the [Options] Soft key and select the
③
[Join All] option.
④ Press the [OK] key. All of the multi-party call participants can now hear
each other.
Removing One Participant
① Press the [Options] Soft key and select the [Exclude] option.
② Press the [Up/Down] key to highlight a participant and press the [OK] key.
The call ends with that participant, but you can continue to talk with other
participants.
③ Complete the multi-party call by closing the folder or pressing the [

4.11 Ending a Call

To end the active call, press the pressing the [
at a time while you are in multi-party call, select 'End All Calls' followed by
Options.

5. Using the Headset

You can send or receive a call without touching the phone, using the headset.
28
privately with that person.
] key.
] key. To terminate all calls
When you connect the headset to the jack located at the left side of the phone,
the button on the headset works as described below;
To show the recent calls, press the button in standby mode
To redial the last call, press the button twice in standby mode
To answer a call, press the button when you receive a call
To complete a call, press and hold the button when you have finished a
call.