Kenwood TK-3312 Service Manual page 7

5-5. Item Setting Mode
In this mode, the selected item in the Item Selection
mode can be programmed.
When the [S] key is pressed in the Item Selection mode,
the transceiver enters the Item Setting mode.
The setup items for item setting mode are as follows
Setup item Display
1. RX FREQ
→
1. RX frequency
*** . *****
2. RX SIG
TONE OFF/
2. RX signaling QT *** . * /
DQT *** N/
DQT *** I
3. TX FREQ →
3. TX frequency
*** . *****
4. TX SIG →
TONE OFF/
4. TX signaling QT *** . * /
DQT *** N/
DQT *** I
5. RF power Hi/Low 5. PWR ***
6. Scan Del/Add 6. SCN ***
7. Beat shift on/off 7. SFT ***
8. Compander on/off 8. CMP ***
Key operation
Key
Changing the selection item (RX/TX frequency and
[Selector]
RX/TX signaling only)
[Side1] No action
[Side2] No action
• Store the current settings and return to the Item
Selection mode without backup.
• A MHz digit of the frequency blinks. (RX/TX fre-
[S]
quency only)
• The icon of the current signaling configuration
blinks. (RX/TX signaling only)
Abort the current settings and return to the Item
[A]
Selection mode without backup.
[<B] Toggle/Decrease the blinking value.
[C>] Toggle/Increase the blinking value.
REALIGNMENT
Remarks
Receive frequency
450.00000~520.00000MHz
Receive QT/DQT
Transmit frequency
450.00000~520.00000MHz
Transmit QT/DQT
HI/LOW
DEL/ADD
ON/OFF
ON/OFF
Key Function
TK-3312/3317
5-6. Self Programming Mode flow chart
■ Channel selection mode flow chart
[S]+Power ON Display
Data password SLF.LOCK.R
SLF.LOCK.W
Read authorization password /
Overwrite password entry (6 digits)
[S]
Self programming mode
[A] [S]
Channel selection mode Zone selection
[A] [S] [<B] : Zone/Channel number decrement
[C>] : Zone/Channel number increment
Item setting mode
[S]
■ Item selection mode flow chart
Channel selection mode
1. RX frequency
[A]
2. RX signaling
[A]
3. TX frequency
[A]
4. TX signaling
[A]
5. RF power Hi / Low
[A]
6. Scan Del / Add
[A]
7. Beat shift on / off
[A]
8. Compander on / off
[A]
Item setting mode
When the Read
authorization password is
or set to the transceiver.
When the Overwrite
authorization password is
set to the transceiver.
SELF
I - I
Zone Channel
[Selector]
Channel selection
[S]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
[S]
[Selector]
7