Conducting Overdubbing; Recording Automatically (Auto Rec) - Tascam DR-05X Reference Manual

Conducting overdubbing

1.
Press the RECORD [0] button to begin recording
standby.
The overdubbing ON/OFF pop-up appears.
2.
Use the + or − button to select ON from the overdubbing
ON/OFF pop-up. (Default: OFF)
3.
Press the RECORD [0] button to start overdubbing.
Overdubbing will start.
When recording starts, the REC indicator lights and the
display shows the elapsed and remaining recording
times.
The following error message appears if the selected file
cannot be played back.
4.
To stop recording, press the ¤ (HOME) [8] button.

Recording automatically (AUTO REC)

This function starts and pauses recording, starts new files,
and sets marks automatically according to the input signal
level.
1.
Press the MENU button to open the MENU screen.
2.
Use the + or – button to select (highlight) the REC
SETTING menu item, and press the 7 button.
The REC SETTING screen opens.
3.
Use the + or – button to select (highlight) the MODE item,
and press the / or 7 button.
4.
Use the + or - button to set the AUTO REC mode.
OFF(Default): Off
NEW FILE: Records and pauses automatically
MARK: Sets marks automatically during recording
5.
Press the . button to enable selection of settings.
6.
Use the + or – button to select (highlight) the LEVEL
item, and press the / or 7 button.
7.
Use the + or – button to set the level that signal is
judged to have been input to -6dB, -12dB (default),
-24dB or -48dB.
8.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.
9.
Press the RECORD [0] button to begin recording
standby.
Recording starts automatically when the input signal
exceeds the LEVEL setting.
4 – Recording
27
TASCAM DR-05X