Front Panel; Rear Panel - Tascam DR-05X Reference Manual

w Q UICK button
When playing back, stopped, paused or in recording
standby when the Home Screen is open or when the
Playback Control screen is open, press this button to
display the Quick menu. The functions shown depend on
the state of the unit when the button is pressed.
i Stopped: DELETE, DIVIDE and LEVEL ALIGN functions
for the current song
i Playing back or on Playback Control screen: LEVEL
ALIGN
i Recording standby: LEVEL MODE
When recording, press this button to increment the track,
dividing the recording by creating a new file.
When the BROWSE screen or PLAYLIST screen is open,
press this button to open or close the pop-up menu for
file/folder operations.
e / button
Press this button during playback or when playback is
stopped to skip to the beginning of the next track.
When IN and OUT points are set between the current
position and the end of the track, press this button to skip
to those points.
Press and hold to search forward.
On the setting screens, use this button to move the cursor
right. Use this to confirm the selection of a setting item or
to answer "YES" to a confirmation message.
Press this button while pressing and holding the MARK
button to move to the next mark.
On the BROWSE screen, press this button to move down a
level. If a file is selected, the file is loaded, the Home Screen
reopens and the unit stops.
Press this button during recording or recording standby
to increase the input level from the built-in microphone
or MIC/EXT IN jack. During adjustment, a pull-up with
meters showing the input level will appear at the bottom
of the display.
2 – Names and Functions of Parts
r 7 button
When the Home Screen is open and playback is stopped,
press to start playback.
During playback, press this button to start jump-back
playback.
When a file or folder is selected on the BROWSE screen,
press this button to return to the Home Screen and play
the file or the first file in the folder from the beginning.
t M ARK button
Use to add marks manually during recording and playback.
Press when stopped at a mark location to delete that mark.
Press the . or / button while pressing and holding
this button to move to the previous or next mark, respec-
tively. When the Playback Control screen is open, use this
button to set the IN (start) and OUT (end) points of the
interval that you want to set for loop playback.
When the IN and OUT points are already set, press this
button to cancel loop playback and clear the IN and OUT
points.

Front panel

y Strap holder
Use this to attach a strap.

Rear panel

u M IC/EXT IN jack
Use this input jack to connect a stereo mini-jack micro-
phone or an external input device. This supports plug-in
power.
The built-in mic is disabled when an external mic is
connected to the MIC/EXT IN jack.
7
TASCAM DR-05X