Nokia 6088 User Manual page 79

N6088_UG_EN_060728.fm Page 78 Friday, July 28, 2006 3:50 PM
O r g a n i s e r
Set the timer
1. In the standby mode, select
Interval timers or Settings.
Use Normal timer to measure the countdown time for tasks that have one
period (timer name). Select
with more than one period.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
appears in the standby mode with the countdown timer set. When the time
runs out, your device sounds an alarm, displays the timer note, vibrates (if set),
and flashes its lights.
Press any key during the alarm to stop the alarm. After 30 seconds the timer alert
stops automatically.
Change the time
After you have set the timer, you can change the time.
1. In the standby mode, select
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
Interrupt the timer
After you have set the timer, you can stop the timer. In the standby mode, select
Menu > Organiser > Timer
■ Stopwatch
You can use the stopwatch in your device to track time. The stopwatch displays
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ms format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure time
1. In the standby mode, select
Lap timing > Start. The running time is displayed.
78
Menu > Organiser > Timer >
Interval timers to save sets of countdown times
Menu > Organiser > Timer >
> Stop timer.
Menu > Organiser > Stopwatch
Normal timer,
Change time.
> Split timing or