Nokia 6088 User Manual page 40

N6088_UG_EN_060728.fm Page 39 Friday, July 28, 2006 3:50 PM
3. Enter your mailbox phone number, including the area code.
4. Enter any dialling codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number:
2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned speed dialling
key in the standby mode.
Insert dialling codes
Press * repeatedly to cycle through dialling codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialling string.
The following dialling codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
+—Replaced by the international access code.
w—Waits for you to press the center selection key before sending the numbers or
codes that follow.
Clear voice mail icon
To clear the voice mail icon from the display, in the standby mode, select
Messages > Voice messages
■ Minibrowser messages
Web messaging is a network service. See "Network services" p. 69.
If your wireless service provider supports this feature, you can use the
minibrowser to check for e-mail messages. In the standby mode, select
Messages > Minibrowser messages
See "Uni" p. 26 for more information on using the minibrowser in your device to
access web pages.
> Clear voice message icon.
> Connect.
M e s s a g e s
Menu >
Menu >
39