Nokia 6088 User Manual page 62

N6088_UG_EN_060728.fm Page 61 Friday, July 28, 2006 3:50 PM
2. Select the device function you want to tag: Profiles,
recorder, Log.
3. If necessary, select an option associated with that function.
4. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag.
with voice tags assigned.
Activate a voice command
After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now displayed, pronounce the voice tag clearly into the
microphone.
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Playback—Listen to the voice command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
■ Call settings
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key
except the right selection key or end key.
In the standby mode, select
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
Voice
appears next to commands
Menu > Settings > Call > Anykey answer
S e t t i n g s
mailbox, Voice
> On or Off.
61