Nokia 6088 User Manual page 39

N6088_UG_EN_060728.fm Page 38 Friday, July 28, 2006 3:50 PM
M e s s a g e s
Save voice mailbox number
Your wireless service provider may have already saved your voice mailbox number
to your device. Select OK to leave the number unchanged.
1. In the standby mode, select
mailbox number. The mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number, and select
OK.
Call and setup voice mail
1. After you save the voice mailbox number, in the standby mode, press and
hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Menu > Messages > Voice messages
mailbox number. When you connect and the prerecorded greeting begins, follow
the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialling codes into phone numbers such
as voice mail, and save the number to a speed dialling location. Dialling codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialling string. See "Phone numbers with dialling codes" p. 38.
Voice mail services vary by wireless service provider. The following instructions
are examples of common operations. Please check with your wireless service
provider for specific instructions on using your voice mail service.
Phone numbers with dialling codes
Dialling codes instruct the receiving system to pause, wait, bypass, or accept the
numbers that follow them in the dialling string. To set up dialling codes, do the
following:
1. In the standby mode, select
2. Scroll to an (empty) speed dialling slot, and select Assign.
38
Menu > Messages > Voice messages
> Listen to voice messages
Menu > Contacts > Speed dials.
> Voice
to dial the voice