Nokia 6088 User Manual page 68

N6088_UG_EN_060728.fm Page 67 Friday, July 28, 2006 3:50 PM
Security level. Enter your security code, and select
options:
None—Disable security level protection.
Memory—Enable memory protection.
Phone—Enable phone protection.
Access codes
You can change your device access codes and PIN code. In the standby mode,
select Menu > Settings >
following options:
Change security code—Change the security code to a new one.
Change PIN code—Change the PIN code to a new one.
Voice privacy
Voice privacy is a network service. See "Network services" p. 69. If your wireless
service provider supports this feature, the voice privacy feature protects the
privacy of your current phone conversation from other callers placing phone calls
on your same network. In the standby mode, select
Voice privacy > On or Off.
Personal unblocking key (PUK) code
The PUK code is used to restore a blocked PIN code. The PUK code is 8 characters
in length and cannot be changed. The PUK code must be obtained from your
wireless service provider.
Important: If you enter an incorrect PUK code 10 times in succession,
the UIM card is rejected and can no longer be used. You must contact
your wireless service provider for a new UIM card.
■ Enhancement settings
The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. In the standby mode, select
Enhance-ments > Headset,
OK and one of the following
Security > Access codes. Then choose one of the
Menu
Handsfree or Charger.
S e t t i n g s
> Settings > Security >
Menu > Settings >
67