Table of Contents
Advertisement
3. Press channel number then press ENT to select the channel you desired.
4. Press 2 to enter the Program Text.
5. Enter the text using number keys. (see "Text Input Chart").
Note: If you make a mistake, press < or > to move to the character you want to change.
For example, to identify amateur (ham) radio transmissions in the 6 meter range, input "HAM 6m" as follows:
. "H" is the second letter associated with 4 on the keypad. Press 4 then 2.
. "A" is the first letter associated with 2 on the keypad. Press 2 then 1.
."M" is the first letter associated with 6 on the keypad. Press 6 then 1.
. "Space" Press ./CLEAR.
. "6" is the sixth number associated with 1 on the keypad. Press 1 then 6.
. "m" is the first letter associated with 6 on the keypad. Press 6 and FUNC (for the lower case set), then press
1.
5. Press ENT to input the text.
Text Input Chart
Press
Character
./CLEAR
Space
2
A B C
3
D E F
4
G H I
5
J K L
6
M N O
7
P Q R S
8
T U V
9
W X Y Z
SCANNING CHANNELS
To begin scanning channels or to start scanning again after monitoring a specific channel, press SCAN.
Notes:
. You must store frequencies into channels before the scanner can scan them. The scanner does not scan
through empty channels.
Press
Character
1
1 2 3 4 5 6 7 8 9 0
2 FUNC
a b c
3 FUNC
d e f
4 FUNC
g h i
5 FUNC
j k l
6 FUNC
m n o
7 FUNC
p q r s
8 FUNC
t u v
9 FUNC
w x y z
Advertisement
Table of Contents
