Maintenance - Fluke 65 Calibration Information Manual

Model 65
Calibration Information

Maintenance

Installing the Batteries
Remove the holster to access the battery door. Figure 1 shows how to replace the batteries.
• Match the + and − polarities of the battery with the battery case.
•
Do not attempt to recharge the batteries.
•
Do not throw batteries into a fire.
•
Follow local laws or regulations when disposing of batteries.
B
The indicates battery life remaining. Replace both batteries when
Cleaning the Focal Lens
Do not use solvents to clean the focal lens. Blow off loose particles using clean, dry, compressed air. Gently
brush remaining debris away with a camel hair brush or high-quality lens tissue. The tissue may be
moistened with clean water.
Cleaning the Case and Holster
Use soap and water or a mild commercial cleaner. Wipe with a damp sponge or soft rag.
4
Caution
Figure 1. Replacing the Batteries
I
starts blinking.
acd02f.eps