D-Link DI-824VUP Factory Default Settings page 40

Frequently Asked Questions (continued)
What are virtual servers?
A Virtual Server is defined as a service port, and all requests to this port will be
redirected to the computer specified by the server IP. For example, if you have an FTP
Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN
(port 1723) server at 192.168.0.7, then you need to specify the following virtual server
mapping table:
Server Port
21
80
1723
How do I use PC Anywhere with my DI-824VUP?
You will need to open 3 ports in the Virtual Server section of your D-Link router.
Step 1
Open your web browser and enter the IP Address of the router (192.168.0.1).
Step 2
Click on Advanced at the
top and then click Virtual Server
on the left side.
Step 3
Enter the information as
seen below. The Private IP is the
IP Address of the computer on your
local network that you want to
connect to.
Step 4
The first entry will read as
shown here:
Step 5
Click Apply and then click
Continue.
Server IP
192.168.0.5
192.168.0.6
192.168.0.7
Enable
X
X
X
140