D-Link DI-824VUP Factory Default Settings page 27

Frequently Asked Questions (continued)
How can I set up my DI-824VUP to work with a DI-804V or DI-804HV
Router? (continued)
Next you need to configure the DI-804V or DI-804HV Router.
Step 1
Access the router's web configuration by entering the router's IP address in
your web browser. The default IP address is 192.168.0.1. Login using your password.
The default username is "admin" and the password is blank.
Step 2
Click on Basic Setup and then select Device IP Settings on the left.
Step 3
Change the LAN IP address so
that it is on a different subnet than the
LAN of the DI-824VUP.
Step 4
Click Next until you reach the
Save & Restart screen. Click Save &
restart and then click Basic Setup once
until the unit has rebooted.
Step 5
Click on VPN Settings.
Step 6
Name your VPN connection and
click ADD.
Step 7
In Remote IP Network and
Remote IP Netmask fields enter the
network identifier and corresponding
subnet mask of the DI-824VUP´s LAN.
Step 8
In the Remote Gateway IP field
enter the WAN IP address of the DI-
824VUP and make sure that the
Network Interface is set to WAN
Ethernet.
Step 9
Verify that Secure Association is set to IKE and that Perfect Forward Secure is
Disabled.
127