D-Link DI-824VUP Factory Default Settings page 22

Hide thumbs Also See for DI-824VUP:

Frequently Asked Questions (continued)

I have two DI-824VUP Routers, how can I set them up to work with

each other? (continued)

Step 23

Follow these instructions to configure your other DI-824VUP using the

exact same settings for the IKE Proposal and the IPSec Proposal. Also make sure

that Step 4 is configured to reflect the LAN settings for what is now the Local DI-

824VUP and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP of

what is now the remote DI-824VUP.

Step 24

To establish the connection, open a command prompt and ping an IP

address of a computer on the remote LAN. Once you receive replies the tunnel has

been established.

How can I set up my DI-824VUP to work with a DI-804V or DI-804HV

Router?

You need to first configure your DI-824VUP router.

Step 1

Log into the Web-based

configuration of the router by typing in

the IP address of the router (default:

192.168.0.1) in your web browser. By

default the username is "admin" and

there is no password.

Step 2

Click the VPN button on the left

column, select the checkbox to Enable

the VPN, and then in the box next to

Max. number of tunnels, enter the

maximum numbers of VPN tunnels that

you would like to have connected.

122