D-Link DI-824VUP Factory Default Settings page 29

Frequently Asked Questions (continued)
How can I set up my DI-824VUP to work with a DI-804V or DI-804HV
router? (continued)
Step 3
To view the Status of the VPN
on the DI-804V or DI-804HV, click on
Device Status.
Step 4
From the Device Status screen
click on VPN Status.
Step 5
When the VPN has been
established the Status will be Active.
How can I set up my DI-824VUP to work with a DFL-300 Firewall?
You need to first configure your DI-824VUP router.
Step 1
Log into the web based configuration of the router by typing in the IP address of
the router (default: 192.168.0.1) in your web browser. By default the username is "admin"
and there is no password.
Step 2
Click the VPN button on the left column, select the checkbox to Enable the
VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers
of VPN tunnels that you would like to have connected.
129