Maintenance; Cleaning; General Cleaning; Laundering - Invacare Matrix MX1 User Manual

7 Maintenance

7.1

Cleaning

General Cleaning

1. Wipe the outer cover with a damp cloth when necessary.

Laundering

1. Release the hook and loop fasteners securing the back cushion
cover. The hook and loop fasteners are located on the top and
bottom edge and inside of the back shell.
2. Remove the foam cushion.
3. Remove the lumbar support. Refer to Installing/Adjusting the
Lumbar Support on page 19.
4. Remove the cover from the back shell.
5. Follow the washing instructions on the cover.
6. Allow the cover to fully dry.
7. Install the cover onto the back shell.
8. Insert the foam cushion into the cover.
9. Ensure the foam cushion is fully inserted and the perimeter of the
foam is aligned with the cover seams.
10. Install the lumbar support. Refer to Installing/Adjusting the Lumbar
Support on page 19.
Part No. 1176090
7.2

Inspection

WARNING
Check ALL fasteners weekly to ensure that mechanical
connections and attaching hardware are tightened
securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are
discovered. Corrective maintenance can be performed at
or arranged through your equipment supplier.
Visually inspect parts including hardware, brackets, upholstery materials,
foams (if accessible), and plastics, for deformation, corrosion, breakage,
wear or compression.
7.3

Reuse

WARNING: Risk of Injury
Always have a dealer inspect the product for damage
before transferring the product to a different user. If any
damage is found, DO NOT use the product. Otherwise
injury may occur.
27
7 MAINTENANCE
Invacare® Matrx® MX1