Siemens SINUMERIK 840D pl Manual page 70

Installation/configuration
4.5 SIMATIC IoT2040
# General setup for the virtual host
apache2/htdocs"
#ServerName www.example.com:443
#ServerAdmin you@example.com
ErrorLog "/usr/local/apache2/logs/error_log"
TransferLog "/usr/local/apache2/logs/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM-encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate, you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate that can also be configured in
# parallel.
SSLCertificateFile "/usr/local/apache2/ssl_cert/certificate.pem"
SSLCertificateFile "/usr/local/apache2/ssl_cert/certificate.pem"
#SSLCertificateFile "/usr/local/apache2/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you have both a RSA and a DSA private key, you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/usr/local/apache2/ssl_cert/key.pem"
#SSLCertificateKeyFile "/usr/local/apache2/conf/server-dsa.key"
#SSLCertificateKeyFile "/usr/local/apache2/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM-encoded CA certificates that form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/usr/local/apache2/conf/server-ca.crt"
70
DocumentRoot "/usr/local/
ServerName IoT2040:443
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB