Infrastructure - Siemens SINUMERIK 840D pl Manual

\\?\Device\Harddisk0\Partition2
\\?\Device\Harddisk0\Partition3
\\?\Device\Harddisk1\Partition0
\\?\Device\Harddisk1\Partition1
Virtual input devices
Virtual output devices
● Next step: Command
Note: Run the following lines as a command:
dd if=D:\temp\example-V2.2.0.wic of=\\?\Device
\Harddisk1\Partition0 bs=10M --progress
Error correction when the image is written to the SD card
If you expect problems when the image is written to the SD card:
● Disconnect the Internet connection.
● Stop the antivirus software.
A local security regulation can also hinder the execution of disk tools.
● Attempt to write the image to the SD card with a computer with less restrictive security
settings.
4.5.2

Infrastructure

Overview
This chapter provides notes and tips for the configuration of the IoT2040 in your network. The
Linux installation is largely identical. But some specific topics for the associated Yocto image
must be observed.
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB
link to \\?\Device\HarddiskVolume2
link to \\?\Device\HarddiskVolume3
link to \\?\Device\Harddisk1\DR4
Removable media other than floppy. Block size = 512
size is 7780433920 bytes
link to \\?\Device\HarddiskVolume7
Removable media other than floppy. Block size = 512
size is 7780433920 bytes
/dev/zero
/dev/random
-
-
/dev/null
(null data)
(pseudo-random data)
(standard input)
(standard output)
(discard the data)
Installation/configuration
4.5 SIMATIC IoT2040
39