Siemens SINUMERIK 840D pl Manual page 38

Installation/configuration
4.5 SIMATIC IoT2040
3. Write "dd --list".
A list of all mounted drives and partitions appears.
4. Search for the correct drive that you want to use. Observe the displayed warning.
5. Download the image file and the target drive to the "dd tool".
The procedure takes approximately 3 - 5 minutes.
The success is displayed.
6. Next step: Output
dd --list
rawwrite dd for windows version 0.6beta3.
Written by John Newbigin <jn@it.swin.edu.au>
This program is covered by terms of the GPL Version 2.
Win32 Available Volume Information
\\.\Volume{7994290d-4b77-11e2-b265-c01885b5e329}\
link to \\?\Device\HarddiskVolume2
fixed media
Not mounted
\\.\Volume{afccbe56-4bb9-11e2-8a23-2cd444b4b548}\
link to \\?\Device\HarddiskVolume1
fixed media
Mounted on \\.\c:
\\.\Volume{049b1544-4b77-11e2-a26b-806e6f6e6963}\
link to\\?\Device\HarddiskVolume3
fixed media
Mounted on\\.\d:
\\.\Volume{66f507b7-c527-11e7-8975-005056c00008}\
link to\\?\Device\HarddiskVolume7
removeable media
Mounted on \\.\f:
\\.\Volume{049b1547-4b77-11e2-a26b-806e6f6e6963}\
link to\\?\Device\CdRom0
CD-ROM
Mounted on \\.\e:
NT Block Device Objects
\\?\Device\CdRom0
\\?\Device\Harddisk0\Partition0
\\?\Device\Harddisk0\Partition1
38
size is 2147483647 bytes
link to \\?\Device\Harddisk0\DR0
Fixed hard disk media. Block size = 512
size is 500107862016 bytes
link to \\?\Device\HarddiskVolume1
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB