Siemens SINUMERIK 840D pl Manual page 46

Installation/configuration
4.5 SIMATIC IoT2040
4. Save the change.
5. Open the directory: cd /usr/local/apache2/srclib/apr/
Run the following commands:
./configure --prefix=/usr/local/apr/
make
make install
/usr/local/apache2/srclib/apr/libtool --finish /usr/local/apr/lib/
Compiling and installing Apache APR-util
1. Switch to the folder: cd /usr/local/apache2/srclib/apr-util/
2. Run the following commands:
./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/
apr
make
make install
Compiling and installing Apache HTTP server (httpd)
1. Switch to the folder: cd /usr/local/apache2/
2. Run the following command:
Note: Run the following lines as a command:
./configure --prefix=/usr/local/apache2 --with-apr=/usr/local/apr/
bin --with-apr-util=/usr/local/apr-util/bin --with-pcre=/usr/
local/pcre/bin/pcre-config
Note
Line breaks
Retain the line breaks - The preceding lines form a command.
make
make install
Starting and stopping Apache Webserver (httpd)
● Manual start:
/usr/local/apache2/bin/apachectl start
● Manual stop:
/usr/local/apache2/bin/apachectl –k stop
● Manual restart:
/usr/local/apache2/bin/apachectl –k graceful
46
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB