Siemens SINUMERIK 840D pl Manual page 66

Installation/configuration
4.5 SIMATIC IoT2040
extra\httpd-ssl.conf
#
# This is the Apache server configuration file providing SSL
support.
# It contains the configuration directives to instruct the server how
to
# access pages over an https connection. For detailed information
about these
# directives, see <URL:http://httpd.apache.org/docs/2.4/mod/
mod_ssl.html>
#
# Do NOT simply read the instructions here without understanding
# what they do. They are shown only as hints or reminders. If you are
unsure,
# consult the online docs. You have been warned.
#
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if insufficient
entropy
# is available. This means you then cannot use the /dev/random
device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device that does not
# block. So, if available, use this one instead. Read the mod_ssl
User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# When we also provide SSL, we must listen to the
# standard HTTP port (see above) and to the HTTPS port
#
#Listen 443
66
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB