System Requirements - Siemens SINUMERIK 840D pl Manual

Introduction

3.2 System requirements

3.2 System requirements
If you want to connect "Manage MyMachines /Remote" to an existing control environment, the
following requirements must be met.
Requirement
To connect to MindSphere, you need a current version of the SINUMERIK Integrate client - and
the service client for Manage MyMachines /Remote. Install and configure the client
subsequently.
Note
Windows XP
Windows XP and older versions of Windows do not support the TLS1.2 encryption protocol for
secure data transmission that is necessary for a connection to MindSphere.
Operating software and hardware
The following procedure is provided with the following components by way of example:
Table 3-1
Operating software version
HMI-Advanced V07.06.02.05
HMI-Advanced V07.06
HMI-Advanced V06.04
SINUMERIK Operate V2.7.3.10
SIMATIC IoT2040
Component
SIMATIC IoT2040
SIMATIC IoT2000 SD card example image
Apache HTTP server (http)
Apache APR
Apache APR-util
PCRE
14
SINUMERIK 840D pl
SINUMERIK Integrate
Client software version
V4.12.0.21
V4.12.0.21
V4.12.0.21
Manage MyMachines /Remote - installation in existing control environments
Hardware version
PCU 50.3B
PCU Base 8.6
PCU 50.1
PCU 50.3B
PCU 50.1
PCU 50.3B
PCU 50.3
PCU 50.5
Description
Hardware
Firmware for IoT2040
Condition for Apache
Condition for Apache
Condition for Apache
Application examples, 10/2018, A5E45211403B AB
Operating system
WinXP SP3
WinXP as of V8.6
SP3
WinXP as of V1.3