Nd Filter - Canon XF705 Instruction Manual

4k
Hide thumbs Also See for XF705:
Table of Contents

Advertisement

ND Filter

ND Filter
Using the ND filter allows you to open up the aperture to
obtain a shallower depth of field even when recording in
58
bright surroundings. You can also use the ND filter to avoid
the soft focus caused by diffraction when using small
apertures. You can select one of 3 density levels.
You can also perform this function remotely using Browser
Remote on a connected network device (A 162, 168).
Operating modes:
Press the ND FILTER + or
• Repeatedly pressing the ND FILTER + button will change the ND filter setting in the following order: [ND 1/4] 
[ND 1/16]  [ND 1/64]  ND filter off (no onscreen display).
The ND FILTER
• The selected ND filter setting will appear at the bottom of the screen.
NOTES
NOTES
• About the ND warning:
In the following cases, if the ND filter setting is not appropriate, an ND warning icon will start flashing next to
the ND filter setting*.
- The gain value is too high
- The aperture is too closed
- The shutter speed is too fast
Change the ND filter setting by pressing the ND + button (when
flashing) until the ND warning icon disappears to mitigate the effect of such conditions.
* When the optional RC-V100 Remote Controller is connected to the camcorder, the RC-V100's ND filter indicator will flash as
well.
• If you set an assignable button to [ND +] or [ND –] (A 117), you can press the button to change the ND filter
setting.
• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white
balance (A 67) may be effective in such case.
• About changing the ND filter setting using the optional RC-V100 Remote Controller:
- When the remote controller is connected to the camcorder, you can use the remote controller's ND button in
the same way as the camcorder's ND FILTER + button.
- ND filter indicators 1 to 3 will illuminate in orange when the ND filter is set to 1/4, 1/16 and 1/64, respectively.
button to select the desired ND filter setting.
button cycles through the settings in reverse order.
is flashing) or ND – button (when
is

Advertisement

Table of Contents
loading

Table of Contents