Canon XF705 Instruction Manual page 193

Menu item
"
[SDI/HDMI Max. Res.]
[SDI Output]
[3G-SDI Mapping]
[SDI/HDMI Scan Mode]
[G-LOCK/SYNC Term.]
[Genlock Adjustment]
[SYNC Scan Mode]
#
[Time Code Mode]
[Time Code Run]
[Time Code DF/NDF]
[Set Time Code]
[User Bit Recording Mode]
[User Bit Type]
[TC In/Out]
$
[Key Lock]
[Camera Grip REC Button]
[Touch Screen Response]
2
[REMOTE Term.]
[WL-D6000]
2
[LED]
[Tally Lamp (Front)],
[Tally Lamp (Rear)],
[SD Card Access LED],
[ (Ethernet)]
Setting options and additional information
[3840x2160], [1920x1080]
[On], [Off]
[Level A], [Level B]
[P], [PsF (Forced 1080i)]
[HD Sync Output], [Genlock Input]
–1023 to +1023 (000)
The phase difference between the external Genlock signal and the camcorder is initially set to 0. This
setting allows you to adjust it within the range of approx. ±0.4 H (–1023 to 1023). To set a 4-digit
adjustment value, set the first field to 10 or –10.
[P], [PsF]
[Preset], [Regen.]
[Rec Run], [Free Run]
[DF], [NDF]
[00:00:00:00] to [23:59:59:29] (59.94 Hz recordings) or [23:59:59:24] (50.00 Hz
recordings)
[Internal], [External]
[Setting], [Time], [Date]
[In], [Out]
[All Buttons], [All Except REC Button]
[Disable], [Enable]
Enables/disables the use of the REC button on the grip. This setting is available only in
[Normal], [Low]
Adjusts the sensitivity of the camcorder's LCD touch screen.
[RC-V100 (REMOTE B)], [RC-V100 (REMOTE A)], [Standard]
[On], [Off]
Enables/disables the use of the supplied wireless controller (WL-D6000).
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp (Front)], [Tally Lamp (Rear)]: The tally lamps on the camcorder. Note that regardless of
this setting, when the camcorder is turned off, the tally lamps will illuminate in red momentarily after
the Q button is pressed. These options are available only in
[SD Card Access LED]: The SD card access indicators when the camcorder is accessing the card.
[ (Ethernet)]: The (Ethernet) indicator when the camcorder is accessing a wired network.
Menu Options
(A 145, 146)
(A 145)
193
(A 145)
(A 143)
(A 92, 94)
(A 92)
(A 94)
(A 88)
(A 88)
(A 89)
(A 89)
(A 93)
(A 91)
(A 93, 94)
(A 43)
mode.
(A 39)
mode.