Getting
Safety
Started
Home
Prev Next
Battery
Modem
Installation
Installation
Handset
Ethernet
Installation
Configuration
Handset Installation
Handset Charger Installation
Plug the power adapter into the power port on the bottom of the charger. Route the
cord through the slots and plug the other end into the electrical outlet as shown
below. Make sure the electrical outlet is not controlled by a wall switch.
NOTE: Use only the AC power adapter supplied with this telephone. This power
adapter is intended to be correctly oriented when placed on a horizontal
surface.
Touchstone DTM602G Telephony Modem Setup Guide
About the
Trouble-
Usage
Handset
shooting
Glossary
20