Installation Instructions - Arris Touchstone TM702 User Manual

Getting
Safety Started
Battery
Installation Installation
Installing USB Drivers on Your PC
When you plug the Telephony Modem into the PC's USB port, Windows automati-
cally detects the hardware and begins installing the USB drivers.
This procedure does not explain how to provision the Telephony Modem or other-
wise initiate actual service.
The latest USB drivers and documentation are available on line at
http://www.arrisi.com/support/usb/index.asp
Note:
Requirements
Make sure you have the following before attempting to install the USB drivers:

Installation Instructions

Select the link for your operating system to see the installation instructions.
Touchstone TM702 Telephony Modem User's Guide
USB Ethernet
Drivers Configuration
Not all Telephony Modems are equipped with a USB port.
• PC with:
— CD-ROM drive
— at least one free USB port
— one of: Windows 2000, Windows XP, or Windows Vista (Windows 95,
Windows 98, and Windows NT are not supported)
— ARRIS USB Driver CD
• USB A/B Cable of appropriate length (a cable is included in your Telephony
Modem package)
• (for installations not using DHCP) IP address, subnet, gateway, and DNS in-
formation
• Installing USB Drivers on Windows 2000
• Installing USB Drivers on Windows XP
• Installing USB Drivers on Windows Vista
Usage Troubleshooting Glossary
24