Cisco VG400 Software Configuration Manual page 20

Voice gateway
Hide thumbs Also See for VG400:
Table of Contents

Advertisement

Cisco IOS Bulk Configuration
• Shutdown and no shutdown are required on the voice port after loop-length is configured for it totake
• Because up to 2 ren is supported on long-loop (OPX-lite) FXS, when loop-length long is configured on
• When loop-length short is configured on the FXS voice port, if the voice port has ring dc-offset configured,
ren
The existing ren CLI under FXS voice port will accept value 1-2 for FXS voice port with loop-length long
configured. For short loop-length analog FXS voice port, ren CLI will accept value 1-5.
ren dc-offset
The existing ring
cm-current-enhance
The existing
vmwi
The existing
For configuration examples, see Cisco VG400 Configuration Examples.
Cisco IOS Bulk Configuration
An optional bulk-configuration mechanism for voice-port and voice dial peer is available to save on time.
group
The group option is added to dial-peer CLI for dial peer bulk configuration. It has the following formats:
dial-peer group <tag> pots
dial-peer group <tag> pots all stcapp
The second command from the above list will create dial peers on all analog voice ports as stcapp ports by
expanding it to the following three commands:
dial-peer group <tag> pots
service stcapp
port all
The group command is specific for stcapp-controlled analog ports. Therefore, only a subset of dial peer
commands are supported, which are as follows:
1. port
2. description
Cisco VG400 Voice Gateway Software Configuration Guide
14
effect.
the FXS voice port, if its existing ren configuration is greater than 2, it will be changed automatically to
2, a message "The existing ren configuration is changed to 2" is displayed on the console.
the ring dc-offset configuration will be removed. A message "The existing ring dc-offset configuration
is removed" is displayed on the console.
CLI is configurable on the long loop-length FXS voice port.
dc-offset
cm-current-enhance
vmwi [fsk | dc-voltage]
CLI is configurable on the long loop-length FXS voice port.
is configurable on all on-board FXS voice ports.
Configuring Voice Ports

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents