Cisco VG400 Software Configuration Manual page 18

Configuring the Voice Port
3. voice-port slot/bay/port
4. description string
5. no shutdown
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Router> enable
Step 2 configure terminal
Example:
Router# configure terminal
Step 3 voice-port slot/bay/port
Example:
Router(config)# voice-port 1/0/8
Step 4 description string
Example:
Router(config-voiceport)# description Voice Port
One
Step 5
no shutdown
Example:
Router(config-voiceport)# no shutdown
Cisco VG400 Voice Gateway Software Configuration Guide
12
Configuring with the Command-Line Interface
Purpose
Enables privileged EXEC mode.
• Enter your password, if prompted.
Enters global configuration mode.
Enters voice-port configuration mode.
Attaches a text string to the configuration that describes the
connection for this voice port. This description appears in
various displays and is useful for tracking purpose or use
of the voice port. The string argument is a character string
from 1 to 255 characters in length. By default, there is no
text string (describing the voice port) attached to the
configuration.
Activates the voice port. If a voice port is not being used,
shut down the voice port by using the shutdown command.