Belkin F6D4230-4 User Manual page 85

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 85 of 114
1. Pull down the Apple menu. Select "Control Panels" and select "TCP/IP".
2. You will see the TCP/IP control panel. Select "Ethernet Built-In" or "Ethernet"
in the "Connect via:" drop-down menu (1).
(1)
(2)
[keep]
3. Next to "Configure" (2), if "Manually" is selected, your Router will need to be
set up for a static IP connection type. Write the address information in the
table below. You will need to enter this information into the Router.
[MacOS9 chart.tif] [use current image] [keep]
[xxxxxxx][use current image]