Host Name; Change Wan Mac Address - Belkin F6D4230-4 User Manual

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 36 of 114
Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP
A dynamic connection type is the most common connection type found with cable
modems. Setting the connection type to "dynamic" in many cases is enough to
complete the connection to your ISP. Some dynamic connection types may
require a host name. You can enter your host name in the space provided if you
were assigned one. Your host name is assigned by your ISP. Some dynamic
connections may require that you clone the MAC address of the PC that was
originally connected to the modem.

1. Host Name (1)

This space is provided to enter a host name that needs to be visible to your ISP.
Enter your host name here and click "Apply Changes" (3). If your ISP did not
assign you a host name, or you are not sure, leave this blank.

2. Change WAN MAC Address (2)

If your ISP requires a specific MAC address to connect to the service, you can
enter a specific MAC address or clone the current computer's MAC address
through this link.
(1)
(2)
(3)
[insert Dynamic_IP.tif]