Belkin F6D4230-4 User Manual page 41

20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008 clean.doc
Page 41 of 114
Type in your password and retype it into the "Retype Password" box to
confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Service IP Address
Provided by your ISP. Enter your PPTP gateway/service IP address here.
5. IP Assigned by ISP
If your ISP provided you with a specific IP address, select "Yes" and enter
your IP address and subnet mask in the fields that appear.
6. Connection ID (Optional)
Provided by your ISP. Enter the connection ID here.
Setting your Internet Service Provider (ISP) Connection Type to Layer 2
Tunneling Protocol (L2TP)
[Israel Only]. Some ISPs require a connection using L2TP protocol, a type of
connection most common in Israel. This sets up a direct connection to the ISP's
system. Type in the information provided by your ISP in the space provided.
When you have finished, click "Apply Changes" (7). After you apply the changes,
the "Internet Status" indicator will read "Connection OK" if your Router is set up
properly.