Selecting The Operating Band - Icom IC-9700 Basic Manual

3
BASIC OPERATION

Selecting the operating band

Do the following steps to change the operating band.
Also, the band stacking register provides 3 memories
for each band key to store frequencies and operating
modes. This function is convenient to quickly recall
previously operated frequencies and modes on the
selected band.
D Using the band stacking registers
Follow the steps below to enter a register on the
selected band.
1. Touch the MHz digits. (Example: 146)
• Opens the BAND STACKING REGISTER screen.
2. Touch a band key. (Example: 1295 MHz)
L The same band cannot be set to both Main and Sub
bands.
BAND STACKING REGISTER screen
TIP: Selecting a different Register
• Touching the band key for 1 second changes between
the 3 Registers.
• Touch to return to the previous screen.
Selecting the operating mode
You can select between the SSB (LSB/USB), SSB
data (LSB-DATA/USB-DATA), CW, CW reverse, RTTY,
RTTY reverse, AM, AM data (AM-DATA), FM, FM data
(FM-DATA), DV and DD* modes.
*Only for the 1200 MHz band
1. Touch the mode icon (example: FM).
• Opens the MODE screen.
2. On the MODE screen, touch the desired mode
key. (Example: SSB).
L In the SSB, AM or FM modes, the [DATA] key is
displayed.
• Operating mode selection list
LTouch mode key to select the operating mode.
Mode key
[SSB]
[CW]
[RTTY]
[AM]
[FM]
[DV]
[DD]
[DATA]
Selecting the Data mode
You can operate data communications (SSTV, RTTY
(AFSK), PSK31, JT65B and FT8).
L When a data mode is selected, you can mute the input
from the microphone.
» SET > Connectors > MOD Input
MENU
> DATA MOD
3-3
Operating mode
USB LSB
CW CW-R
RTTY RTTY-R
AM
FM
DV
DD
LSB LSB-D
USB USB-D
AM AM-D
FM FM-D