Table of Contents
Advertisement
The casing and insulation can be removed to facilitate
access into the place of installation. To do so, proceed
as follows.
- Remove the plug (2). Unscrew the two fixing screws
and remove the top insulation section (3).
- Remove the protective fitting plugs (4).
- Unzip the plastic cover (5).
- Remove the insulation shells (6).
Reverse the above steps to fit the insulation again.
b
Make sure that the insulation shells (7) are securely
fixed in place by straps before fitting the plastic
cover. Use a strap wrench if necessary.
b
Wear suitable personal protective equipment and
use suitable safety devices.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children,
since it can become a potential hazard. Dispose of
packaging material in compliance with applicable
legislation.
16
INSTALLATION
2
3
6
5
4
Advertisement
Table of Contents
