Advertisement
Instructions for the User
4.6
Preheating with delayed start
The program with delayed pre-heating is set as follows:
•
Turn the knob to the
•
Press the "PUSH" button for at least 3 seconds; the display shows the
current hour flashing.
•
Turn the knob to the
•
Press the "PUSH" button; the display will show the minutes flashing.
•
Turn the knob to the
•
Press the "PUSH" button; the display will show the temperature
flashing.
•
Turn the knob to the
•
Press the "PUSH" button; the display will show the cooking start hour
flashing.
•
Turn the knob to the
•
Press the "PUSH" button; the display will show the minutes flashing.
•
Turn the knob to the
•
Press the "PUSH" button to exit from the data setting and saving
phase. The text "PEnd" appears on the display and after 3 seconds it
will display P39, the temperature and the pre-heating start time in
succession.
•
To start the program press the "START" button for at least 2 seconds.
The display will show the current time and "P39A" in succession until
the program is activated at the set time.
The oven will perform preheating at the set time; during this phase the
display shows "P39", the text "InF" and the set temperature in
succession; this will continue until interrupted by the "STOP" button.
The program must be activated every day. To reactivate it press the
"START" button for at least 2 seconds.
or
symbols to select the program "P39".
or
symbols to set the current hour.
or
symbols to set the minutes.
or
symbols to set the temperature.
or
symbols to set the cooking start hour.
or
symbols to set the minutes.
27
Advertisement
