Smeg FC66B Instructions For Installation And Use Manual page 13

Instructions for the user
7.6.1 Change the settings in the secondary menu
The secondary menu appears at first use, after a power failure or by
holding PT1 down for 3 seconds with the oven in the OFF position (see
point "7.2 Operating modes").
Changing the parameters in the secondary menu is very simple. See the
following diagram:
MENU MODIFICATION PROCEDURE SYMBOLS
Turn PT1 to the right
to increase (
value or to set the
ON
status.
Turn PT1 to the left
to decrease (
value or to set the
OFF
status.
Press PT1 to move to
the next setting in
the menu.
setting P3, press PT1
to resume normal operation
of the oven.
+
) the
-
) the
After
45