Description Of Commands - Smeg F610 Instructions For Use Manual

Front panel and commands

2.2 Description of commands

Selects the desired cooking functions. The symbols are shown below.
Turning the knob the various function symbols light up, simultaneous
with the timer and internal oven light indicators.
NO FUNCTION SET
UPPER AND LOWER
HEATING ELEMENT
LOWER HEATING ELEMENT
WIDE GRILL ELEMENT
LOWER HEATING ELEMENT +
VENTILATION
UPPER AND LOWER HEATING
ELEMENT + VENTILATED
HEATING ELEMENT
Selection of cooking temperature.
Turn the knob clockwise to the required temperature, between 50°
and 250°C. The temperature light indicates that the oven in is heating-
up phase.
When this light goes out, the preset heating temperature has been
reached.
The light will come on periodically during use to indicate that the oven
is being kept at the set temperature by a thermostat.
Lets you choose manual cooking or the timer with automatic turn-off of
the oven when done.
For manual control of cooking time, turn the knob anticlockwise to the
symbol
To set cooking time turn the knob clockwise. The numbers from 10 to
120 correspond to minutes. Adjustment is progressive and
intermediate positions between the numbers shown may be used.
At the end of programmed cooking an intermittent sound signal is
emitted. This can be de-activated by turning the function selector knob
to the position
20
FUNCTION SWITCH KNOB
THERMOSTAT KNOB
TIMER KNOB
.
.
GRILL ELEMENT
UPPER AND LOWER HEATING
ELEMENT + VENTILATION
WIDE GRILL ELEMENT +
VENTILATION
GRILL ELEMENT + VENTILATION
DEFROSTING
VENTILATED HEATING ELEMENT +
VENTILATION