Description Of Commands - Smeg F65-7 Instruction Manual

Front panel and commands

2.2 Description of commands

Selects the desired cooking functions. The symbols are shown below.
Turning the knob the various function symbols light up, simultaneous
with the timer and internal oven light indicators.
NO FUNCTION SET
GRILL ELEMENT IN OPERATION
ALTERNATING WITH BOTTOM
HEATING ELEMENT
UPPER AND LOWER
HEATING ELEMENT
GRILL ELEMENT
WIDE GRILL ELEMENT
GRILL ELEMENT + VENTILATION
Used to select the cooking temperature.
Turn the knob clockwise to the desired setting, between 50°C and
250°C. The temperature value will light up to indicate that the oven is
heating up. When this light goes out, the preset heating temperature
has been reached. When the light flashes regularly, it means that the
temperature inside the oven is kept steady on the set level.
Lets you choose manual cooking or the timer with automatic turn-off of
the oven when done.
For manual control of cooking time, turn the knob anticlockwise to the
symbol
To set cooking time turn the knob clockwise. The numbers from 10 to
120 correspond to minutes. Adjustment is progressive and
intermediate positions between the numbers shown may be used.
At the end of programmed cooking an intermittent sound signal is
emitted. This can be de-activated by turning the function selector knob
to the position
20
FUNCTION SWITCH KNOB
THERMOSTAT KNOB
TIMER KNOB
.
.
UPPER AND LOWER HEATING
ELEMENT + VENTILATION
LOWER HEATING ELEMENT +
VENTILATION
VENTILATED HEATING ELEMENT +
VENTILATION
UPPER AND LOWER HEATING
ELEMENT + VENTILATED
HEATING ELEMENT
DEFROSTING